Opportunities By Page 8 8 16 32

1 POLYTEX pinking machine type ZP (Zigzag cutting), knife width 1020 mm, stroke up to 65 mm height, up to 50 cuts per minute, machine equipped with precise hand lever feed mechanism, serrated knife with 4 mm gauge serrations, with FASNACHT security light guards, with laser cut indicator, motor power 2,2 kW, 3 x 380 V, 50 Hz machine delivered with 2 new cutting boards (one to be used and one as spare), machine in immaculate condition as you can observe in the attached pictures.

1 THIES bobbins and ribbon high temperature laboratory dyeing machine for bobbins and/or ribbons type Eco-Bloc LFA, volume 34 litres, loading capacity about 3 Kg, maximum dyeing temperature 140 ºC, automatic difference pressure regulation, circulation pump type UP170, with addition injection pump, electronic cabinet with SIEMENS Simatic S5 PLC, SIEMENS Micromaster Vector frequency inverter to control the circulation pump, THIES POLYMATIC dye cycle controller type T20, addition vat with 3 levels, direct steam heating of addition vat with dedicated temperature controller, machine supplied with 3 carriers for bobbins and 3 beams for ribbon, with technical documentation, machine delivered fully erected (electrical cables and pneumatic pipes are connected to the main electrical panel)

1 BRUCKNER stenter for knittings type VN 24/6, year 1998, working width up to 240 cm, 6 drying fields, gas heating, vertical pin chain, composed of: high entry with CORINO opening and spreading device, finishing foulard, CORINO weft streightener, overfeeding and chain entry with TANDEMATIC selvedge opener, vertical chain with anti-pinning device, long entry for knits and steaming field, selvedge glueing, IR pre-dryer for selvedges (to assure that, if working at high speed, the glued selvedges leave the drying fields completely dryed), 6 drying fields with 12 gas burners, 12 temperature controllers and 12 air circulation ventilators, cooling field, MAHLO Gravimat, selvedge trimming, exit with plaiter, A-frame winding or small roller CORINO non-stop with iluminated inspection

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

1 MCS hydraulic dyeing jigger type Maxi Jigger 3400, roller width 340 cm, working width 320 cm, maximal winding diameter 1400 mm, year 1989, maximal dyeing temperature 98 ºC, dye cycle controller TERMOELETTRONICA type JTronix JP70tc, 2 addition vats, loading capacity in linear meters is calculated with the following formula 1400/fabric thickness in mm, constant fabric speed for the whole batch adjustable from 15 to 150 m/min., constant fabric tension for the whole batch adjustable from 10 to 60 Kg, through entirely build in stainless steel AISI 316, doors with hydraulic lifting, indirect heating via external heat exchanger, direct or indirect cooling, hood with steam coils to prevent condensate dropping,

1 BRAZZOLI high temperature jet dyeing machine type SATURNO 400 HTFMA Super LUX, 2 dyeing chambers, each capacity 200 Kg = total 400 Kg, year 2000, SEDOMAT 5500 dye cycle controller, inverter controlled pump, maximum fabric speed 420 m/min., with PPB (Previous Bath Preparation) tank (using inside center jole of machine space) for heating up the next cycle bath, with 2 add vessels

1 BRAZZOLI high temperature jet dyeing machine type SATURNO 300 HTFM Super LUX, 2 dyeing chambers, each capacity 150 Kg = total 300 Kg, year 2001, SEDOMAT 5500 dye cycle controller, inverter controlled pump, maximum fabric speed 420 m/min., with PPB (Previous Bath Preparation) tank (using inside center jole of machine space) for heating up the next cycle bath, with 2 add vessels

1 SUZUKI sample warper type NAS-140A W-2250, year 2000, working width 2250mm, high speed selector, 10 + 8 channels for enabling the yarn change without speed reduction, pneumatic leasing bars for RC-8 speed-up for constant speed also during leasing, standard creel 10 colours with 10 weft-accumulators, draw-back device on standard creel for yarn balooning prevention, rotational creel RC-101A, 8 colours with 8 ROJ CHRONO HS weft-accumulators, machine can work with both the standard creel and the rotational creel at the same operation, change between one creel and the other is automatic, computerized system, intermediate slide type rewind drum (W-type) beaming unit, full accessories, beam doffer device, machine equipped with "GUIDE PLATE SYSTEM" for enabling much longer warp lengths (up to 420 m length)