Finishing By Page 36 9 18 36

1 RF SYSTEMS radio frequency dryer type TD30 year 2012, 30 kW power, conveyor belt width 1750 mm, drying field passage height 450 mm, entry length 2800 mm, drying field length 4000 mm, exit length 2800 mm, forced air cooling

1 BIANCO rope opening and squeezing line for tubolar knitts, type LINEA APRITUBOLARE, year 2003, roller width 160 cm, rotational plate, pre-squeezing, detwisting, balooning, 1st squeezing unit, J-box vat for softener, balooning, 2nd squeezing unit, spreading unit, plaiter exit, maximum fabric speed 80 m/min.,

1 STALAM radio frequency dryer type RF 85 KW year 2001, 85 kW power, conveyor belt width 1945 mm, drying field passage height 250 mm, entry length 1700 mm, drying field length 6000 mm, exit length 1200 mm, water cooling, machine will be supplied with a new HF generator valve

1 RAMISCH KLEINEWEFERS 2-bowl rolling smoothing and high glaze calender type NIPCO-I model RKK280, 2600 mm face roller width, 2400 mm working width, year 1987, top bowl steel chromed (electro hot water heated) diameter 360 mm, bottom bowl Racolan (NIPCO-roll original ESCHER WYSS) diameter 500 mm, electrical heated, high entry with tension device, ERHARDT & LEIMER metal detector, ELECTROTEX seam detector, banana roller before calender rolls, linear pressure up to 300 N/mm = 80 tons, cooling rollers, exit A-frame contact winder for batches up to 1.800 mm diameter, linear speed up to 100 m/min., with oil circulating lubrication for bearings of steel roller, machine supplied with spare Racolan sleeve

1 OSTHOFF SENGE singeing machine type PK97-VP-IK, year 1998, installed in 2000 roller width 300 cm, working width 280 cm, machine equipped with: A-frame unwinder, high entry, ERHARDT & LEIMER spreading and centering device, ERHARDT & LEIMER selvedge spreaders type KF2020, OSTHOFF SENGE brushing and cleaning unit before singeing type VP97 Vibra-Plus with suction and dust suction and lint filter, OSTHOFF SENGE singeing machine type U97 singeing machine with double jet burners type BR5, OSTHOFF SENGE brushing and cleaning unit after singeing type VP97 Vibra-Plus with suction and wet filter, exit on A-frame winder or linkage to desizing and cold pad batch bleaching unit composed of: high entry with selvedge spreaders, VAN WYK brushing and cleaning unit with suction and cyclone (installed posteriorly and not visible on the drawing, only on the pictures), OSTHOFF SENGE desizing and cold pad batch bleaching box type IK with capacity of 15 m, 2-roller squeeze padder with roller diameter 300 mm and 4 ton pressure, exit on A-frame winder, machine SIEMENS PLC controlled with all LENZER AC motors and LENZE inverters, SIEMENS Siematic OP27 operator panel, Machine can work as simple singeing machine (with pre and after brushing), as desizing and bleaching machine or as combined singeing, desizing and bleaching

1 MARIO CROSTA raising line composed of 2 raising machines type MC/50, year 1980, wire width 340 cm, each raising machine with 32 raising rollers = total 64 raising rollers

1 COMET raizing machine type P8/Z, width 260 cm, 28 raising rollers, machine equipped with PIV drives and frequency inverter to the main motor

1 DANTI PAOLO raising machine type 28/2400, year 1996, working width 240 cm, 28 raising rollers

1 MULLER tubular knitware shearing machine type Schlauchschermaschine, machine used for shearing of dampening sleeves,  shearing spirals width 520 mm, roller width 600 mm, shearing cylinder equipped with 10 HEUSCH shearing spirals type H143006, shearing cylinder 98 mm diameter, spirals height 19 mm, with tiger brushing roller at entry, with suction ventilator

1 Kusters 2 bowl calender, type 212.50-2600, year 1992, 260 cm face roller width, 240 cm working width, upper bowl steel thermal oil heated diameter 400 mm, lower roll racolan S-roll diameter 435 mm, with metal detector, with ELECTROTEX seam detector, entry small roll (up to 500 mm diameter) or can use A-frame unwinder, exit small roll contact winder up to 500 mm diameter

1 BREITENBACH continuous ribbon dyeing and finishing line type BB87/2, year 1988, composed of: - feeding creel for 16 narrow fabric beams diameter 300 mm, - impregnation vat with 2-roller squeezing foulard width 300 mm, - horizontal Infrared pre-dryer with 180 cm length, - electrically heated drum dryer with 2 vertical drums diameter 800 mm and 400 mm width, - water cooled cooling drum diameter 320 mm, - motorized take away system with 3 positions take-off

1 MATHIS continuous dyeing and finishing range for elastic and non-elastic ribbons type MTFJ-B, machine can work as pad-steam, pad-thermosol and pad-dry and/or pad-steam combined with thermosol roller width 200 mm working width 170 mm speed 1-14 m/min. drying temperature up to 200 ºC speed and tension control through frequency converters installation composed of (please observe red numbers above components in attached drawing): Pos. 1 MATHIS type PRE feeding unit with beater to keep ribbons loose at entrance of range Pos. 2 MATHIS type FOU vertical 2-roll impregnation padder for dyeing or finishing with 2 rollers diameter 110 mm pneumatic roller pressure controlled by manometer and pressure regulator Pos. 3 MATHIS type PSE-SEC dryer and thermofixation unit (thermosol process) up to 200 ºC and/or steam unit to process up to 105 ºC (pad steam process) capacity 23 m Pos. 4 MATHIS type LAV washing module composed by 6 wash units each of the 6 wash units has 2,1 m ribbon content and 1 vertical 2-roller padder with pneumatic roller pressure controlled by manometer and pressure regulator heating through direct steam injection wash units with counter flow system (cleaner water from last washing units flows back into the first ones) Pos. 5 MATHIS type SEC hot air dryer with strong air ventilation and max. temperature of 200 ºC heated by electric heaters of 15 kW capacity 23 m Pos. 6 MATHIS type RET ribbon take-up unit to remove ribbons out of the dryer and distribute in boxes vertical 2-roll padder with pneumatic roller pressure controlled by manometer and pressure regulator

1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder

1 BRUCKNER stenter type HN 26/4 for terry fabrics, year 1997, working width 260 cm, 4 thermal oil heated fields, combined horizontal pin and clip chain, high entry with BIANCO centering and opening, BIANCO weft streightener, finger uncrawlers ERHARD & LEIMER type FR1501, entry field with 3 m length, exit of drying field with 90 cm long cooling field, plaiter exit

2 spare calander rollers for a RAMISCH type RK 440H calander face roller width 340 cm consisting of: 1 brand new TEFLON roller face roller width 340 cm, never used, face roller width 340 cm, diameter 550 mm, shaft diameter 150 mm, traction side length 580 mm from end of TEFLON face, non-traction side length 470 mm from end of TEFLON face, total length 4450 mm 1 roller same as above but already used and with need of grinding, diameter 500 mm each roller packed in 1 wooden box

1 MAT type Supervelox Dry, multi-purpose rope washing / scouring / softening / fulling / bulking / tumbling machine, year 1990, The fabric is kept at high speed circulation while meeting a strong warm air flow (controlled by a steam-to-air exchange battery); the air feed has a continuous partial integration with new fresh air. The humidity reduction in movement and the mechanical action of the rear beater plate give to the fabric very interesting finishing effects, which may be enhanced by additional chemicals. The bellowing air is kept in close circulation and its flow follows the same direction as the fabric. Top roller to increase fabric grip against belt. Air cushion for delicate fabric treatment. Rear beater plate to give a smoother handle and/or have a light milling effect

1 LAMPERTI raising machine type GB, year 1988, wire with 230 cm, 36 raising rollers, can run open width or tubular, updated with inverter to the main motor

1 IMB MAKiNA (Turkey) heat setting machine for tubular knittware year 2011 working width 30 to 120 cm 2 chambers, gas heated cooling zone touch screen control machine with low working hours

1 MARIO CROSTA shearing machine type CMB/1, year 1990, for knittings, terry and fabrics, shearing spirals width 220 cm, shearing cylinder equipped with 22 SCHLENTER shearing spirals type 142644 with 18 mm height, high entry with tensioner and CEIA metal detector, 2 motorized brushing rollers, motorized selvedge uncrowling rollers motorized selvedge uncrowling belts before shearing cylinder, seam detector with automatic shearing group lift for selvedge passage, cylinder oscillating device, plaiter exit, machine inverter and PLC controlled, with suction ventilator and dust filter, machine delivered with a complete spare shearing group (shearing cylinder + under ledge blade + support) also with SCHLENTER blades 142644 with 18,5 mm height

1 XETMA VOLLENWEIDER shearing machine type OPTIMA XS-3600 roller width 3600 mm, working width 3400 mm year 2009 CEIA metal detector at entry plaiter exit LENZE inverters

1 FRANZ MULLER tiger brushing machine for blankets type PRN-32, machine indicated for preparing the shearing process of blanket / false fure / high pile fabrics rollers width 260 cm, fabric speed 2.5 - 20 m/min., ajustable distance between fabric and brushing cylinder, ajustable rotation speed for brushing cylinder (300 - 750 m/min.), ajustable fabric tension between front and rear, seam detector with automatic seam passage device, backside brush with arc for adjusting cloth arc, plaiter exit

1 SUCKER MULLER tigering, polishing and shearing line for high pile fabrics, type PPC-2, year 1991, composed of: - 1 MULLER table raising machine / tiger type PRN, roller width 225 cm, seam detector and automatic brushing table oscilation - 1 Syncronation J-box accumulator - 1 SUCKER MULLER polishing and shearing machine type PPC-2 with electrical heated polishing cylinder, shearing cylinder (spirals) width 180 cm, shearing cylinder with 10 blades made SCHLENTER type 204281 round shearing table for high pile fabrics, automatic lubrification, pneumatic pressure and lifting between shearing cylinder and under ledge blade, pneumatic shearing group oscilation shearing cylinder oscilation (plaiter) for regular ware out of the spirals, beating roller, exit with flat plaiter, machine with SIEMENS SPS computer control electrical motors with inverter control (LENZE) with spare shearing group (shearing cylinder + under ledge blade + support) core cylinder diameter 120 mm, spirals height 23 mm, total cylinder diameter 166 mm, flange diameter 145 mm

1 COMET shearing machine type 64/C 240 cm spiral width Cylinder equipped with 20 shearing spirals Brushing roller before shearing cylinder high entry with tension plaiter exit machine delivered with spare shearing cylinder

1 THIES discontinuous tumbler type T150 year 1989, conveyor width 150 cm, steam heated, entry and exit at the same side

1 MARIO CROSTA wet brushing machine type STRICA STR/ 86-C6 6 brushes, 2 padders, 190 cm roller width, machine to set pile’s direction on wool and blended fabrics like LODEN with polishing effect, specially suitable for Men’s wear, lady’s wear/silk, coats – overcoats

1 LAFER fringing machine type FRV 3000 working width 300 cm year 2001 cloth speed 40 m/ min. with automatic device for threading of yarn into the fringes-binding needle installed power 4 kW